| |
Megol Getriebeoel CLP 22
EP lubricants with outstanding lubricating and wear protection properties. Produced from high quality
base oils and most modern sulphur-phosphorus-additives. Suited for use in industrial gears, roller-
and plain bearings with high pressure loads, also especially for large plants with circulation system
lubrication.
Approvals / Specificaions:lube oil DIN 51517 - CLP 22
Characteristic data |
|
|
approx. values |
ISO viscosity class |
DIN 51519 |
|
2 |
Viscosity at 0¡ãC |
DIN 51562 |
mm2/s |
190 |
Viscosity at 40¡ãC |
DIN 51562 |
mm2/s |
22 |
Viscosity at 100¡ãC |
DIN 51562 |
|
|
Viscosity index |
DIN ISO 2909 |
|
5 |
De-emulsifying capacity / 54¡ãC |
DIN 5159 |
min. |
<10 |
Ash, oxide |
DIN EN 7 |
g/100 g |
0,03 |
Ash, sulphate |
Din 51759 |
g/100 g |
0,04 |
Content of asphaltenes |
DIN 51595 |
g/100 g |
m.n.n.*) |
Content of undissolved substances |
DIN 51592 |
g/100 g |
0,5 m.n.n.*) |
Corrosive effect on steel |
DIN 51585 |
degree of corrosion |
0-B |
Corrosive effect on copper |
DIN 51759 |
degree of corrosion |
1-125 A3 |
Ageing properties |
|
|
|
Increase of viscosity |
DIN 51586 |
% |
1,0 |
Precipitate number |
DIN 51586 |
ml |
< 0,05 |
Neutralisation index after 1000 h |
DIN 51587 |
mg KOH/g |
< 2,0 |
Timken test |
SEB 181 302 |
|
|
Wear under a load of
43 lbs after 10 min. |
mg |
|
< 4,0 |
Accepted load |
lbs |
60 |
|
Foaming properties |
Properties against |
sealing |
|
material |
DIN 51566 |
|
|
SRE-NBR 1 pursuant to
DIN 53538 Part 3 after
7 days at 100¡ãC |
|
S1B-0/0
S2B-0/0 |
|
FZG-gear test, shor |
Change in volume
Change in hardness |
S3B-0/0 |
-3 |
Normal-test A/8,3/90 |
DIN 51354 part 2
Failure load level
Special weight chang |
mg/KWh |
< 0,27 |
|
|
